×
Kirsch Designer Metals 1" Collection
Selection Guide
The information below is designed to provide an explanation of the various products that are typically combined to create a complete/finished drapery rod.
-
An Important Note about Drapery Hardware Classification: Drapery Hardware is classified by each Collection's Rod or Pole Diameter. For example, if you are looking at the Kirsch 1" Designer Metals Collection, that means that all of the items in that Collection are based upon, named for, and 'fit' a 1" diameter pole.
-
- 1. Pole: Designer Metals 1" Poles are available as fixed-width poles. Fixed Width Poles can be cut down and are available in 4-foot (48"), 6-foot (72") and 7-foot, 9-inch (93") Lengths. Choose a Pole that is the same length or longer than you need. All Designer Metals Poles come with Finial Plugs, which are placed into each end of the pole and allow a finial to be screwed-in. Designer Metals fixed-width Poles can be cut-down with a pipe-cutting tool, chop saw, or hacksaw. If you need a longer pole, Designer Metals fixed-width Poles can be joined with a Splice. A Bracket must be placed directly under each point where Poles are joined.
- 2. Finials: Designer Metals 1" Finials are sold in Pairs and are 'screwed-in' to the end of the rod.
-
3. Brackets/French Returns: The Designer Metals 1" Collection offers six Bracket options. The number and style of Brackets you need depends on your application. Generally, two brackets are sufficient for the 4-foot pole, and three Brackets are sufficient for the 6-foot and 7 foot nine inch poles. 'Return', as noted below, is the distance between the center-line of a pole seated in a bracket and the wall:
- a. 3" Return O Bracket: The 'standard' Return Brackets, suitable for most applications.
- b. 6" Return O Bracket: Use this bracket in cases where additional clearance is needed.
- c. 3" and 6" Bypass Brackets: For longer poles where additional support is needed, but in a manner that does not impede drapery ring travel. The Bypass Bracket, along with the C-Ring, allows you to place a bracket anywhere along a pole's width. This bracket is typically used with longer one-way panels, or on very wide windows where a number of Poles have been joined with splices.
- d. 3" and 6" French Returns: For a clean look that causes the rod to return to the wall, French Returns serve as brackets and eliminate the need for Finials. Should a bracket be needed in the center, select a corresponding 3" or 6" O Bracket.
- 4. Rings: 1" Designer Metals offers 'Standard Rings' and 'C-Rings'. C-Rings are Bypass Rings, which "pass-over" one of the available Designer Metals 1" Bypass Brackets. The combination of C-Rings and Bypass Brackets allows you to place a bracket in a position drapery travel would prevent with standard rings and brackets.
×
Kirsch Designer Metals 1" Collection
Product Information & Warranty
Good design demands perfection, and perfection shines through the Kirsch Designer Metals Collection. With an expansive assortment of sophisticated styles and striking finishes, each piece is designed with thoughtful details to compose a dramatic statement for your home. Below you will the Kirsch 1" Designer Metals Brochure and 10-Year Warranty information
-
Kirsch 1" Designer Metals Pole
Regular price From $29.31Regular priceUnit price per -
Kirsch 1" Designer Metals Fitz Finial
Regular price $29.78Regular priceUnit price per -
Kirsch 1" Designer Metals Gavin Finial
Regular price $42.36Regular priceUnit price per -
Kirsch 1" Designer Metals Maxwell Finial
Regular price $42.36Regular priceUnit price per -
Kirsch 1" Designer Metals Milo Finial
Regular price $42.36Regular priceUnit price per -
Kirsch 1" Designer Metals Soren Finial
Regular price $53.89Regular priceUnit price per -
Kirsch 1" Designer Metals Turin Finial
Regular price $53.89Regular priceUnit price per -
Kirsch 1" Designer Metals Rings
Regular price $28.37Regular priceUnit price per -
Kirsch 1" Designer Metals C-Rings
Regular price $24.58Regular priceUnit price per -
Kirsch 1" Designer Metals Ring Lock
Regular price $18.62Regular priceUnit price per -
Kirsch 1" Designer Metals 3" Return O Bracket
Regular price $29.00Regular priceUnit price per -
Kirsch 1" Designer Metals 3" Return Bypass O Bracket
Regular price $29.00Regular priceUnit price per -
Kirsch 1" Designer Metals 6" Return O Bracket
Regular price $35.29Regular priceUnit price per -
Kirsch 1" Designer Metals 6" Return Bypass O Bracket
Regular price $35.29Regular priceUnit price per -
Kirsch 1" Designer Metals 3" French Returns
Regular price $144.98Regular priceUnit price per -
Kirsch 1" Designer Metals 6" French Returns
Regular price $144.98Regular priceUnit price per -
Kirsch 1" Designer Metals Internal Splice
Regular price $3.42Regular priceUnit price per -
Kirsch Designer Metals Ring Clips
Regular price $8.46Regular priceUnit price per -
Kirsch 1" Designer Metals Finial Plug
Regular price $3.42Regular priceUnit price per
